![](/images/new-backgrounds/1061137/6113723x1.webp)
Leveling/Adjustments/Alignments (cont.)
7
Anti-tip Device Installation (cont.)
3 | 4 |
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Set the high corner of range so that the top of side trim is 3/8” (0.95 cm) above countertop. Level range to high corner.
Mark and drill holes where bracket will be located. | Attach bracket with |
| mounting hardware provided. |
WARNING
Tipping hazard.
To reduce the risk of property damage or personal injury; install
1
Measure
ment(A )
Measure from floor to bottom
of the
This will be measurement (A).
Connecting Gas & Electric
DANGER
Gas leak hazard.
To avoid risk of personal injury or death; leak testing of the appliance must be conducted
according to the manufacturer’s instructions. Before placing appliance in operation, always check for gas leaks with soapy water solution.
• DO NOT USE AN OPEN FLAME TO CHECK FOR GAS LEAKS.
Note: Refer to electrical and gas requirements section for proper installation information.
2
X
|
|
|
|
|
|
|
|
| nt | (A | ) |
|
|
|
|
|
|
|
| e |
| ||
|
|
|
|
|
|
| m | ) |
| ||
|
|
|
|
| e | .3 | cm |
| |||
| ea | sur | (1 |
|
|
| |||||
M |
| 2 | ” |
|
|
|
|
|
| ||
+ | 1/ |
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
Locate
measurement (A) plus 1/2” (1.3 cm) from the floor and
Range | “X” |
Width | Dimension |
30” | |
36” | 8” (20.3 cm) |
48” | 5” (12.7 cm) |
|
|
60” | 5” (12.7 cm) |
Anti-tip location for each range width.
1
Connect gas and electrical.Before placing appliance in operation, always check for gas leaks. This must be performed by your dealer,a qualified licensed plumber,or gas service company.
22 | 23 |