Clearance Dimensions (Proximity to Cabinets)

Clearance Dimensions (Wood/Composite Overlay)

This range may be installed directly

 

adjacent to existing 36” (91.4 cm) high

 

base cabinets.

 

IMPORTANT: The side trim MUST be

 

3/8” (.95 cm) above the adjacent base

 

cabinet countertop. This can be

 

accomplished by raising the unit using

 

the adjustment spindles on the legs.

• The range CANNOT be installed

 

directly adjacent to sidewalls, tall

 

cabinets, tall appliances, or other

 

side vertical surfaces above 36”

 

(91.4 cm) high. There must be a

 

minimum of 6” (15.2 cm) side

 

clearance from the range to such

 

combustible surfaces above the

 

36” (91.4 cm) counter height.

Within the 6” (15.2 cm) side

 

clearance to combustible vertical

 

surfaces above 36” (91.4 cm), the

 

maximum wall cabinet depth

Wall cabinets above the range must be a minimum of 42” (106.7 cm) above the range cooking surface for the full width of the range. This minimum height requirement does not apply if a range hood is installed over the cooking surface.

 

 

 

 

 

 

 

 

 

 

 

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(

9-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

 

/

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

.

 

5.9

c

 

 

 

 

 

 

 

 

m

a

x

 

 

 

 

 

 

m)

 

 

 

 

 

 

 

)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

m

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

c

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

.0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

in

.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

m

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2”

 

)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

 

 

 

 

 

 

 

 

4

.7

cm

 

 

 

 

 

 

 

 

 

 

 

 

 

0

6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

mi

 

 

 

(1

 

 

 

 

 

 

 

 

 

 

 

(

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5.

 

 

n.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2c

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

m)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

m

in

.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

)

The bottom of a standard hood should be 30” (76.2 cm) min. to 36” (91.4 cm) max. above the countertop. This would typically result in the bottom of the hood being 66” (167.6 cm) to 72” (182.9 cm) above the floor. Refer to the range hood installation instructions for additional information. These dimensions provide for safe and efficient operation of the hood.

W

 

 

 

 

 

 

 

o

 

 

 

 

 

 

 

o

 

 

 

 

 

 

 

d/

 

 

 

 

 

 

C

 

 

 

 

 

 

 

o

 

 

 

 

O

 

m

 

 

 

 

 

p

 

 

v

 

 

 

o

 

 

e

 

 

 

si

 

 

rl

 

 

 

t

 

 

 

a

 

 

e

 

 

 

 

y

 

 

W

 

 

 

 

 

 

 

o

 

 

 

 

 

 

 

o

 

 

 

 

 

 

 

d/

 

 

 

 

 

 

C

 

 

 

 

 

 

 

o

 

 

 

 

O

 

m

 

 

 

 

 

p

 

 

v

 

 

 

o

 

 

e

 

 

 

si

 

 

rl

 

 

 

t

 

 

 

a

 

 

e

 

 

 

 

y

 

 

6

 

 

 

 

 

 

 

6

 

 

 

 

1

 

 

 

 

 

mi

 

(

6

 

 

 

n

 

 

7.

 

.

 

 

 

 

6c

 

7

 

t

 

m)

 

 

o

 

 

 

2

 

 

 

 

 

1

 

 

 

 

 

m

 

 

(

8

 

 

a

 

 

 

2.

 

x.

 

 

 

 

9c

 

 

 

 

 

 

 

m)

 

2

4

)

 

 

 

 

 

 

c

m

 

 

 

 

 

 

 

 

 

 

 

 

 

(6

1

.0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

or

 

 

 

 

 

 

 

 

2

7”

)

 

 

 

 

 

 

 

c

m

 

 

 

 

 

 

(3

8

.6

 

 

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

 

 

 

 

)

 

 

 

 

 

 

 

m

 

 

 

 

 

 

(0

c

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

 

 

 

 

 

 

 

 

 

 

 

(

0

 

 

 

 

 

 

 

7

 

 

mi

 

 

 

.

 

n.

 

 

6

2c

3

 

 

t

 

m)

 

 

 

o

 

6

 

 

 

 

(

 

 

 

 

 

 

 

 

m

 

9

 

 

 

a

 

 

1.

cx.

 

 

 

 

 

4

 

 

 

 

 

 

 

m)

 

 

 

 

 

 

 

 

must be 13” (33.0 cm) and wall

cabinets within this 6” (15.2 cm)

side clearance must be 18”

(45.7 cm) above the 36”

(91.4 cm) high countertop.

 

 

 

 

 

 

 

 

 

1

8

.7

cm

 

3

6

m

)

 

 

 

 

(4

5

 

 

c

 

/8”

 

 

 

 

4

 

 

 

 

 

 

 

(9

1.

 

3

)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

cm

 

 

 

 

 

 

 

 

 

 

(0

.9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

 

 

 

 

 

 

6

 

 

 

 

(

 

 

 

 

 

mi

 

1

 

 

 

6

 

 

 

n

 

7.

 

.

 

 

 

6c

 

7

 

t

 

m)

 

 

o

 

 

2

 

 

 

 

 

(

 

 

 

 

 

m

 

 

1

 

 

 

 

8

 

 

a

 

 

2.

 

x.

 

 

 

9c

 

 

 

 

 

 

m)

 

 

3

0”

)

 

 

 

c

m

 

(7

6

.2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6”

)

 

 

 

 

 

 

m

 

 

 

 

.2

c

 

 

 

 

5

 

 

 

 

 

 

 

(1

 

 

 

 

 

 

 

 

3

 

 

 

 

 

 

 

 

 

 

 

 

(

0

 

 

 

 

 

 

 

7

 

 

mi

 

 

 

.

 

n.

 

 

6

2c

3

 

 

t

 

m)

 

 

 

o

 

6

 

 

 

 

(

 

 

 

 

 

 

 

 

m

 

9

 

 

 

a

 

 

1.

 

 

 

 

 

 

 

4cx.

 

 

 

 

 

 

 

m)

Wall Installation

Note: Minimum clearance for back wall is 0” with backguard or high-shelf.

CAUTION

Burn hazard.

To avoid risk of personal injury; the use of cabinets for storage above the appliance may result

in a potential burn hazard. Combustible items may ignite, metallic items may become hot and cause burns. If a cabinet storage is to be provided the risk can be reduced by installing a rangehood that projects horizontally a minimum 5”

(12.7 cm) beyond the bottom of cabinets.

Note: Minimum clearance for back wall is 0” with backguard or high-shelf.

Note: If a range hood is installed, wall cabinets above the range have a different minimum clearance height.

 

Important: This range comes standard

 

with an Island Trim. There must be a

 

minimum of 6” clearance from rear of

 

range to a combustible wall or 0”

Island Installation

clearance to a non-combustible wall.

10

11

Page 6
Image 6
Viking F20533 EN manual Burn hazard

F20533 EN specifications

The Viking F20533 EN is a remarkable piece of engineering that stands out in the realm of outdoor power equipment. Designed with both efficiency and durability in mind, this model caters to a variety of consumer needs, especially for those engaged in gardening, landscaping, or maintenance tasks.

One of the key features of the Viking F20533 EN is its powerful electric motor, which delivers consistent performance without the emissions associated with traditional gas-powered equipment. This not only makes it an eco-friendly option but also ensures quieter operation, allowing users to work in residential areas without disturbing neighbors. The motor is designed for longevity and reliability, promising years of dependable use with minimal maintenance requirements.

The cutting deck of the Viking F20533 EN is crafted from high-quality materials that withstand wear and tear from regular use. With a cutting width of 33 cm, it allows for efficient trimming of grass and other vegetation, making it suitable for a variety of lawn sizes and shapes. Its adjustable cutting height feature ensures users can select the desired grass length, promoting healthy lawn growth.

Incorporating advanced blade technology, the Viking F20533 EN features sharp, precision-engineered blades that provide a clean cut, reducing the risk of damage to the grass. This technology not only enhances the overall aesthetic of the lawn but also supports its health by preventing frayed grass edges.

An ergonomic design is at the heart of the Viking F20533 EN, which includes an adjustable handle to accommodate users of different heights. This feature ensures comfort during extended periods of use, preventing fatigue and promoting efficient mowing practices. The compact design enhances maneuverability, allowing users to navigate around obstacles with ease.

Another significant characteristic of the Viking F20533 EN is its integrated grass collection system. This feature minimizes the need for raking or additional cleanup after mowing, enhancing convenience. The grass collector is designed for easy emptying, ensuring that users spend less time on maintenance tasks and more time enjoying their outdoor spaces.

In summary, the Viking F20533 EN is an innovative solution for outdoor maintenance, combining ecological responsibility with efficiency and user-friendly design. Its advanced features and technologies make it an ideal choice for both amateur gardeners and seasoned landscapers, ensuring a well-maintained lawn with minimal effort. The investment in Viking F20533 EN is sure to pay dividends in the form of a beautiful, healthy outdoor space.