Viking F20696A EN Features Cycles, Model Cycles, Options, Pots/Pans, Normal Wash, Econo/China

Features: Cycles Features: Cycles

Product Controls

200 Model

Cycles

Wash Cycles

POTS/PANS

Heavily soiled pots, pans and casserole dishes. Long heated prewash loosens up encrusted food. High temperature main wash and final rinse.

NORMAL WASH

Normally soiled plates, glasses, bowls, and lightly soiled pots and pans.

ECONO/CHINA

Normally soiled dishware, china and crystal. Lower temperature wash cycle.

RINSE/HOLD

All dishware. Short rinse with no heat.

Options

Options

HI TEMP WASH

Increases the temperature of the main wash and final rinse portions of the cycle. May add extra water for improved cleaning performance. Available on Pots/Pans and Normal cycles.

DELAY START

Lets you delay running the dishwasher for up to 4 hours. To set “DELAY START”, select the desired wash cycle and option(s). Press the “DELAY START” button once and the number “2” will light, indicating a two hour delay. If you desire a longer delay, continue pressing the “DELAY START” button to a 4 hour delay. The corresponding number on the button will light. Once you have set the desired delay time, press the “START” button and close the door. “DELAY START” is not available with the Rinse/Hold cycle.

AUDIBLE SOUND SIGNAL

A single beep will occur when you select cycles, options and press the “START” key. The end-of-cycle signal consists of 2 long beeps. If the “START” button is not pressed or if the door is not closed within 4 seconds of pressing the “START” button, 3 short beeps will occur. For all other error messages and to deselect the audible sound signal, see the Troubleshooting/Fault Codes section.

Product Controls

12 13