Water and Ice Dispensers

Operation

Ice Maker and Ice Storage Bin (cont.)

Remember

•The quality of your ice will be only as good as the quality of the water supplied to the ice maker. AVOID connecting the ice maker toa softened water supply. Water softener chemicals (such as salt) can damage parts of the ice maker and lead to poor quality ice. If a softened water supply cannot be avoided, make sure the water softener is operating properly and is well maintained.

•DO NOT use anything sharp to break up the ice in the bin. This can cause damage to the ice bin and dispenser mechanism.

•DO NOT store anythingon top of the ice maker or in the ice storage bin.

IMPORTANT:

•After connecting the refrigerator to a water source or replacing the water filter, flush the water system. Use a sturdy container to depress and hold the water dispenser lever for 5 seconds, then release it for 5 seconds. Repeat until water begins to flow. Once water begins to flow, continue depressing and releasing the dispenser paddle (5 seconds on, 5 seconds off) until a total of 4 gal. (15 L) has been dispensed. This will flush air from the filter and water dispensing system, and prepare the water filter for use. Additional flushing may be required in some households. As air is cleared from the system, water may spurt out of the dispenser.

•Allow 24 hours for the refrigerator to cool down and chill water.

•The dispensing system will not operate when refrigerator door is open.

Calibrate Measured Fill

Low water pressure may affect the accuracy of the Measured Fill feature. So, for optimum performance of your water dispenser, you must first calibrate Measured Fill.

Water and Ice Dispensers (cont.)

2. Press and hold the OPTIONS and LOCK buttons at the same time for 3 seconds. The words “Back” and “1 Cup” will appear on the display screen. Also, the Calibrate Measured Fill icon will illuminate and remain lit while the Measured Fill feature is being calibrated

NOTE: You may press the ICE MODE button under the word “Back” at any time to exit calibration mode. The Calibrate Measured Fill icon will turn off.

3.	Press and release the water dispenser paddle, as
	needed, to dispense water to the 1 cup fill line.
	NOTE: If overfilling or spilling occurs, discard
	the water and press “Back” to restart the
	calibration process.
4.	When 1 cup of water has been correctly
	dispensed into the measuring cup, press the
	MEASURED FILL button under the word

Operation

IMPORTANT: Flush the water system before calibrating Measured Fill.

1.Place a sturdy measuring cup (1 cup size) on the dispenser tray centered in front of the water dispenser paddle.

A. Water dispenser paddle B. Measuring cup (1 cup)

“Confirm” to confirm the calibration.

5. When Measured Fill calibration has been

confirmed the icons will disappear and the

display will return to the home screen.

A. 1 cup of water

F20875 EN specifications

The Viking F20875 EN is a high-performance electric outboard motor designed for the modern-day boating enthusiast. Engineered to combine efficiency, power, and durability, this outboard motor is particularly well-suited for both recreational and commercial applications. Its advanced features and cutting-edge technologies set it apart from traditional gasoline-powered engines, providing a more eco-friendly alternative without sacrificing performance.

One of the standout characteristics of the Viking F20875 EN is its powerful 75 horsepower output, which allows it to deliver impressive acceleration and speed. This makes it an ideal choice for larger boats that require robust propulsion capabilities. Its lightweight construction ensures ease of installation and handling, enabling boaters to enjoy a seamless experience on the water.

The F20875 EN incorporates innovative brushless motor technology, which offers greater energy efficiency compared to conventional motors. This not only extends the runtime on a single charge but also reduces the overall environmental impact. The electric nature of the motor means minimal maintenance is required, with fewer moving parts than traditional engines. This ensures lower operating costs and hassle-free ownership.

Advanced battery management technology is another key feature of the Viking F20875 EN. It comes equipped with a high-capacity lithium battery system that provides reliable power and long-lasting performance. This system is designed to optimize energy usage, automatically adjusting output based on real-time demands, thus enhancing overall efficiency.

The motor also features an intuitive digital display that provides real-time data on speed, battery life, and operational status. This user-friendly interface allows boaters to easily monitor their performance and make informed decisions, ensuring a safe and enjoyable experience on the water.

In terms of design, the Viking F20875 EN boasts a sleek and robust build, resistant to corrosion and wear. It is designed to withstand harsh marine environments while providing long-term reliability. Additionally, the outboard motor is engineered for quiet operation, minimizing noise pollution and enabling boaters to enjoy serene moments on the water.

In summary, the Viking F20875 EN stands out as a premium electric outboard motor, offering a combination of power, efficiency, and advanced technology. Its impressive features make it an excellent choice for eco-conscious boaters who are looking for performance and sustainability without compromise. Whether for leisurely cruising or demanding commercial use, the Viking F20875 EN redefines the electric outboard experience.

Viking F20875 EN manual Water and Ice Dispensers, Calibrate Measured Fill

Models: F20875 EN