Product Care
Door Replacement and Adjustment
1 | 2 |
| 2 |
| 1 |
| 2 |
| 3 |
Reinstall door to range. | Open door completely. |
| Reinstall hinge trim. |
3 | 4 |
Remove pins from hole in hinges. | Close door. |
5
If the door needs to be adjusted, loosen hinge
trim screws (see step 2). Adjust the screws located between the door and kickplate using a 5/32” hex head allen wrench. After adjustment, tighten hinge trim screws.
46
Troubleshooting
Problem | Possible Cause and/or Remedy |
Range will not function. | Range is not connected to electrical power: |
| Have electrician check power circuit breaker, |
| wiring, and fuses. |
|
|
Oven does not operate in | Door is not shut tight enough for automatic |
door latch to lock. | |
|
|
Oven is not clean after self- | Temperature control knob not rotated all the |
clean cycle. | way past clean until it stops. |
|
|
Broil does not work. | Temperature control knob is rotated too far |
| past broil position. |
|
|
Door will not open. | Oven is still in |
| hot, door latch will release when safe |
| temperature is reached. |
|
|
Oven light will not work. | Light bulb is burned out. |
| Range is not connected to power. |
|
|
Product Care
47
