Installation (con’t)
(VWH 10” H./12”H. Wall Hoods w/Recirculating Kit)
8 | BARE OR GREEN |
| 9 |
|
|
|
| 1 | 1 |
|
|
| 2 | |
|
| GREEN |
| |
|
|
|
| |
|
| BLACK |
|
|
| WHITE |
|
|
|
| WHITE | BLACK |
|
|
|
|
|
|
Installation
(VWH 18”H. Wall & VCWH Chimney Wall Hoods)
1 | 1- |
| 2 |
|
13/16 6 |
| |||
(4. | ” |
|
| |
| Slot for |
| ||
| cm) |
| ||
(3.8 cm) x (1.9 cm) |
| 5/16” | wood strip | 5/16” |
wood strip |
| |||
| nut driver |
| nut driver | |
|
|
| ||
Connect black to black, white to white, and the | Replace electrical box cover. Make connection to |
green/bare wire under the green screw. | breaker box. |
NOTE: Housing wiring must be properly installed for |
|
wiring to be correct when wiring unit. |
|
10 | 11 |
| 1 |
Measure down
3
5/16” nut driver
Use additional mounting screws to secure hood to
wood strip.
5/16” |
nut driver |
Assemble brackets to baffles and insert charcoal filters.
12 
1
2
Slide spacer front over front lip. Push spacer rear up,
then slide back over rear lip.
2 | 3 |
|
Slide filter front over front lip. Push filter rear up, then
slide back over rear lip.
13
1
2 | 3 |
|
Slide filter front over front lip. Push filter rear up, then
slide back over rear lip.
CAUTION: Secure vent hood to wall using screws provided. Use additional mounting screws and wall anchors, if necessary.
4
3
2
Slide filter front over front lip. Push filter rear up, then
slide back over rear lip.
CAUTION: If not using a duct cover, using screws provided, make sure top mounting screws are secured into soffit or cabinet framing use additional mounting screws, if necessary.
5
1
3
2
Slide filter front over front lip. Push filter rear up, then
slide back over rear lip.
32 | 33 |
