Battery Ignitor
corresponding burners)
Side Burner | Rotisserie | Grill Burner |
Control Knob Control Knob Control Knob
To light grill/smoker burner:
Open the hood or remove covers, push and turn the control knob until the High position on the knob aligns with the indicator line on the control panel and continue to hold the knob in. Press the electronic ignition button corresponding to the burner being lit. You will hear a clicking sound. After the burner lights, hold the control knob in for about 5 seconds longer or until the burner remains lit. Turn the control knob to the desired setting. Ifthe burner does not light in 4 seconds, turn the knob to "off" and wait 5 minutes before trying again. This will allow accumulated gas to dissipate. After several failed attempts the burner can be lit with a paper book match. (See below).
If you have just attempted to light the burner with the ignitor, allow 5 minutes for any accumulated gas to dissipate. Place the lit match through the grid next to the flash tube of the burner being lit. Keep your face as far away from the grill as possible. Make sure the match is adjacent to the flash tube.
Push and turn the control knob until the High position on the knob aligns with the indicator line on the control panel. Make sure you are turning the control knob that corresponds with the burner being lit. If the burner does not light in 4 seoonds turn the knob "off", wait 5 minutes and try again. If the burner will not light after several attempts, see the "Troubleshooting" section.
Flash tube
7
