OUTD OOR— COOK ING
53”W. Ul tra-Pre mium T-Se ries/ E-Serie s Gas Gri ll
PLANNING AND DESIGN GUIDE
VIKINGRANGE.COM • 1-888-VIKING1
REL E A S E D 0 5 / 1 2 / 0 8
©20 0 7 VRC — INFORMATION SUBJECT TO CHANGE
22-15/16”
(58.3cm)
16-5/8”
(42.2cm)
10-1/4”
(26.0 cm)
6”
(15.2 cm)
41-3/16”
(104.6 cm)
8”
(20.3cm)*
5-3/8”
(13.7 cm)
31-9/16”
(80.2 cm)
32-3/4”
(83.2 cm)
3” min.
(7.6 cm) to non-
combustable
surface
24” min.
(61.0cm) to
combustable
surface
Minimum clearances
1.Maintain a min. of 6” (15.2 cm) from
thesides, or a min. of 8” (20.3 cm)
fromthe right side if there is a
rotisseriemotor, and a min. of
24”(61.0 cm) from the back above the
cookingsurface to adjacent vertical
combustibleconstruction. Do not
placegrill under unprotected
combustibleconstruction.
2.Maintain a min. of 3” (7.6 cm)
clearancefrom the back of the grill
witha canopy and a min. of 6” (15.2
cm)from the back of the grill without
acanopy to non-combustible
constructionto allow the lid to open
fullyand for proper ventilation. (The
grillexhausts combustion products
andcooking greases to the back.)
Neverplace the grill where the
exhaustis directed at a window, less
than24” (61.0 cm) to combustible
material,or any surface that is difficult
toclean. Allow at least 6” side
clearanceto non-combustible
constructionabove the cooking
surfacefor counter space. If using the
rotisserieoption, the space is essential
formotor and skewer clearance. The
grillcan be placed directly adjacent to
combustibleand/or non-combustible
constructionbelow the cooking
surface.
3.When determining a suitable location
forthe grill, take into account
exposureto wind, proximity to traffic
paths,and keeping gas supply lines as
shortas possible. Place the grill only in
awell-ventilated area. Never place the
grillin a building, garage, breezeway,
shed,or other fully enclosed areas.
Duringheavy use, the grill will
producea lot of smoke; ensure you
haveadequate room for smoke to
dissipate.
4.If using a rear wall, place the electrical
serviceon the right-hand side for the
rotisseriemotor.
IMPORTANT:Gas fittings, regulator, and
installer-suppliedshut-off valve must be
easilyaccessible.
Dimensions & Specifications