Using the Chopper Attachment (Optional Attachment) VHB300CH
1.Place the rubber lid on the bottom of the chopper bowl for stability.
2. | Remove the chopper blade protective | Chopper Attachment |
| cover and insert the blade into bowl. |
|
3. | Add small amounts of food to be |
|
| chopped. | chopper i |
4. | Attach the chopper head to the bowl | head |
| ||
| and lock into place by turning to the |
|
| right. |
|
5. | Insert the motor housing into the top |
|
| of the lid. | chopperi |
6. | Plug unit into proper electrical outlet. | bowl |
| ||
7. | Press the power button to activate | chopper |
bladei | ||
| while holding both the bowl and the |
|
| motor body. | chopperi |
8. | When chopping is complete remove | base/lid |
| ||
| the motor housing by pressing the |
|
| two buttons on the bottom of the |
|
| motor housing. Remove lid and blade. |
|
9. | Make sure unit is off and unplugged from power outlet before | |
| removing attachments. |
|
Note:
Only use the chopper to chop small amounts of food such as meat, cheese, onions, herbs, garlic and nuts. For better performance fill the chopper approximately half full.
USEFUL TIPS
•Cut foods into smaller pieces for ease of chopping when using the chopper attachment.
•Insert the hand blender into product to be processed before turning the unit on to avoid splashing, especially with hot liquids. Also turn the unit off before removal from the mixture.
•When blending on a cooking surface, turn the burner off before blending in the saucepan. Failure to do this may cause harm to the hand blender.
•For optimal blending allow the blender to be immersed at an
angle allowing air flow, thus blending more consistently.
• Remove hard items from the mixture before blending.
6