CORD INSTRUCTIONS
For your protection, this unit should be properly grounded. Unit is equipped with a 3- conductor cord set that has a molded
It is not recommended to use this beverage cooler with an extension cord or power board. Plug unit directly into the electrical outlet.
BEVERAGE COOLER INSTALLATION
•Remove the exterior and interior packaging before use.
•Place your cooler on a flat, dry surface that is strong enough to support the unit when fully loaded.
•This unit is designed to be
•Do not place heavy objects on top of the unit.
•Unit is not designed for installation in a garage or basement.
•Do not place the unit in direct sunlight or near sources of heat. Extreme hot and cold ambient temperatures may cause the unit not to perform properly or increase electrical consumption.
•Do not place the unit next to a major appliance that emits large amounts of heat, such as a dishwasher, microwave, oven, etc.
•Do not plug unit into the same outlet as a refrigerator or microwave.
•Before connecting the appliance to the power source, let it stand upright for approximately 24 hours to reduce the possibility of a cooling system malfunction from handling during transportation.
•Clean the interior surface with lukewarm water using a soft cloth before first use.
6 | W W W . V I N O T E M P . C O M |
