Rear Panel Components
For more information, http://www.hp.com and search for your specific thin client model to find the model- specific QuickSpecs.
Figure 1-4 Rear panel components
(1) | Ethernet | (6) | VGA connector |
|
|
|
|
(2) | PS/2 connectors (2) | (7) | Serial connector |
|
|
|
|
(3) | Parallel connector | (8) | |
|
|
|
|
(4) | Secure cable routing slot | (9) | Power connector |
|
|
|
|
(5) | Universal serial bus (USB) connectors (2) |
|
|
|
|
|
|
Installing the Rubber Feet
You may want to use your thin client in a horizontal orientation. If your unit has VESA (Video Electronics Standards Association) holes in the side, you can install rubber feet on the left side of the unit. The rubber feet help keep the unit safely in place.
To install the rubber feet:
1.Locate the VESA (Video Electronics Standards Association) holes in the left side of the thin client.
CAUTION: If you use the thin client in a horizontal orientation without the rubber feet, it may slide and result in equipment damage. If your unit does not have VESA mounting holes, you will need to obtain the optional side panels with VESA mounting holes.
2.Remove the feet from their backing.
Rear Panel Components | 5 |
