C Mounting the Thin Client

HP Quick Release

If your thin client does not have VESA mounting holes, you must obtain and install the optional side panels with VESA mounting holes and HP Quick Release. To order, visit the HP Web site at http://www.hp.com and search for your specific thin client model.

This thin client incorporates four mounting points on each side of the unit. These mounting points follow the VESA (Video Electronics Standards Association) standard, which provides industry-standard mounting interfaces for Flat Displays (FDs), such as flat panel monitors, flat displays, and flat TVs. The HP Quick Release connects to the VESA-standard mounting points, allowing you to mount the thin client in a variety of orientations.

NOTE: When mounting to a thin client, use the 10 mm screws supplied with the HP Quick Release.

Figure C-1HP Quick Release

22 Appendix C Mounting the Thin Client