Removing and Replacing the Side Access Panel and Metal Side Cover
Removing the Side Access Panel and Metal Side Cover
WARNING! Before removing the side access panel, ensure that the thin client is turned off and the power cord is disconnected from the electrical outlet.
To remove the access panel:
1.Remove the secure compartment cover (1). For more information, see Removing the Secure USB Compartment Cover on page 12.
2.Lay the unit flat on a stable surface with the right side up and the left side down.
3.Slide the access panel about 3 mm (1/8 inch) toward the top of the unit (2), and then lift the access panel up and off the unit (3).
Figure
To remove the metal side cover:
NOTE: You must remove the metal side cover to access internal components such as the battery or the memory.
1.Remove the four screws that secure the metal side cover to the chassis (1).
14 Chapter 2 Hardware Changes