Installing Thin Client Options
Various options can be installed on the thin client:
●Installing the USB Device on page 16
●Removing and Replacing the Battery on page 17
Installing the USB Device
Before beginning the replacement process, review General Hardware Installation Sequence on page 11 for procedures you should follow before and after installing or replacing hardware.
▲Insert the USB device into the USB port in the secure USB compartment. See the following illustration for the location of the ports in the secure USB compartment.
Figure
If you install a USB mouse and a USB keyboard in the secure USB compartment, route the cables around and through the clips, then out the secure cable routing slot, as shown in the following illustration.
Figure
16 Chapter 2 Hardware Changes