BEER DISPENSER TROUBLESHOOTING GUIDE
You can solve many common problems easily, saving you the cost of a possible service call. Try the suggestion below to see if you can solve the problem before contacting Vinotemp at info@vinotemp.com.
PROBLEM | POSSIBLE CAUSE |
Beer dispenser does not | • Not plugged in. |
operate | • Circuit breaker tripped or a blown fuse. |
| • The temperature control knob is set in “OFF” position. |
Turns on and off frequently | • Room temperature is hotter than normal. |
| • Appliance door is open too often. |
| • Door is not closed completely. |
| • Temperature control is not set correctly. |
| • Door gasket does not seal properly. |
| • Beer dispenser does not have the correct clearances. |
Vibrations | • Check to assure that the beer dispenser is leveled. |
Beer Dispenser seems to | • Rattling noise may come from the flow of the |
make too much noise | refrigerant; this is normal. |
| • As each cycle ends, you may hear gurgling sounds |
| caused by the flow of refrigerant in your beer |
| dispenser. |
| • Contraction and expansion of the inside walls may |
| cause popping and crackling noises. |
| • Beer dispenser is not leveled properly. |
Door will not close properly | • Beer dispenser is not leveled. |
| • Door was reversed and not properly installed. |
| • Door gasket is dirty. |
| • The shelves, metal plate, or beer keg are out of proper |
| position. |
TECHNICAL SPECIFICATIONS
Model No. | |
|
|
Power | 115V/60Hz |
|
|
Rated Current | 1.4A |
|
|
Power Input | 115W |
|
|
Power Consumption | .09 kW.h/24h |
|
|
Refrigerant | R134a/3 oz |
|
|
Size (W x D x H) | 20.1" x 24.8" x 33.7" |
|
|
1 7 6 2 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1 | 17 |
i n f o @ v i n o t e m p . c o m |
|