VPM-6228H USER MANUAL 15
Step3.
a) Replace the top
cover over the drive
assembly, making
sure the side groove
guide of the top cover
slides within the side
groove guide of the
bottom cover.
c) Attach the 4-pin power
cable from the rear panel
of the bottom cover to the
4-pin connector on the
back of the 5.25” device.
b) Attach the 40-pin IDE
cable from the rear panel
of the bottom cover to the
40-pin connector on the
back of the 5.25 “ device to
ensure pin-1 to pin-1
connection, orient the cable
so the colored stripe edge
is closest to the power
connector.