VPM-6228H USER MANUAL18
2-4 Connecting the VPM-6228H to a Computer
Computer Requirements
•USB equipped notebook or desktop computer
•Windows 98SE/Me/2000/XP, or Mac OS 9.0 or above
Proceed with the following steps to connect the
VPM-6228H to your computer.
Step1:
Boot-up your computer. Make sure the USB/USB 2.0 host adapter
and driver are installed in your computer.
Step2:
Connect one USB connector end of the USB cable into the USB
Port of your USB 2.0 External Enclosure VPM-6228H.
Step3:
Connect the Power Adapter Power Cord to the +5V/+12V Power
Adapter. Then, plug one end of power cord into an AC power
outlet, and the other end to the power inlet of your USB 2.0 External
Enclosure VPM-6228H.
Step4:
Power ON your USB 2.0 External Enclosure VPM-6228H.
Step5:
Proceed to the next “Driver Installation” section and follow the
instructions for your operating system after plugging the USB
connector end of the USB cable into a USB port on your computer.
Note:This device will auto-detect the speed of your USB port and
adjust between USB 1.0 and USB 2.0 speed once the driver
is installed.