STEP 9 | RED BAG |
9a
9c
5e
9b
•Place the rear hole of the left decorative cover (9a) over the threaded post on the left side of structure 5e. Loosely attach a spring (SW10.2x18.4x2.5T) washer and a bolt (M10x1.5Px25L). Thread two bolts (M10x1.5Px25L) and two spring (SW10.2x18.4x2.5T) washers into the two front holes. Tighten all bolts with a 6mm
•Attach the front decorative cover (9c) over the front surfaces of the side decorative covers with four bolts and four spring (SW10.2x18.4x2.5T) washers. Tighten with a 6mm
17
