Vision Fitness T9600, T9500, T9450, T9700, T9300, T9200, T9350 manual Treadmill will not start

Treadmill will not start

Possible causes:

1.MCB is damaged.

2.8-pin console cable is damaged.

3.PCB is damaged.

4.Motor is damaged.

Fix:

Open motor cover, verify wire connection MTR1 and MTR2 on the MCB then plug in the power cord and turn on the power switch. Then press “START“ button.

Please check below item:

1.Verify the LED indicator of MTR is lit. (If that LED MTR is not lit, replace MCB.)

2.Verify if LED PWM is lit.

(if it is not lit, replace 8-pin console cable.)

3.If LED PWM is still not lit, replace PCB.

4.Replace Motor.

5-5