Vision Fitness T9200, T9600, T9500, T9450, T9700, T9300, T9350 manual Running Belt, Drive Belt

TENSIONING THE BELT

Caution:

Over-tightening of the roller will severely shorten the life of the belt and may cause further damage to other components.

Running Belt:

If when you plant

your foot on the belt, you can feel a slipping sensation then the belt has stretched and is slipping across the rollers. This is a

normal and common adjustment on a new treadmill. To eliminate this slipping, tension both the rear rollers Allen bolts 1/4 TURN as shown above. Try the treadmill again to check for slipping. Repeat if necessary, but

NEVER TURN the roller bolts more than 1/4 turn at a time.

Perfect Tension o f Running Belt: 0.9~1.1 lbs

Drive Belt:

If you have tensioned the running belt and are still experiencing a slipping, adjust the tension screw. Then try the treadmill again to check for slipping.

Perfect Tension of Drive Belt:	70~90 lbs
1-2