Vision Fitness T9500, TM181, T9600 (TM182), T9700 (TM183), TM195) S T E P 3 DATA CABLES, Blue Bag

		0
	:0
0
3

0

S T E P 2 BLUE BAG

•Mount the console to the console mast using four bolts (M8 x 15L) and tighten with the 5mm Allen wrench.

	NOTE: Push all extra data cable into
S T E P 2	the console mast. Make sure not to
	pinch or cut the data cable.

•Mount the right-hand side mount handlebar to the console mast using two bolts (M8 x 135L). Repeat this on the left-hand side.

		0
	:0
0
3

0

S T E P 3 DATA CABLES

S T E P 3

MODELS T9200, T9500, & T9600: Plug in the small data cable into the small plug connection on the lower control board. Plug in the large data cable into the large plug connection on the lower control board. Slide down the rubber covers on the left & right console supports.

MODEL T9700: Plug the large 20-ribbon cable into the 20-pin connection on the lower control board. Slide down the rubber covers on the left & right console supports.

•Install the motor cover making sure that the rubber covers are inserted into the motor cover. Secure the motor

cover using the six (M4 x 12L) screws (see Yellow bag).

6