Vision Fitness T9800 Series manual E P 5 AUTO-CALIBRATION

S T E P 5 AUTO-CALIBRATION

DO NOT STAND ON THE BELT WHEN PERFORMING AUTO-CALIBRATION

You need to access User Engineering Mode to run the auto-calibration. With the safety key in place , please hold down SPEED DOWN and ENTER for 5 seconds. When in the User mode, “USER ENG MODE” appears in the alphanumeric window. To access the data press the ELEVATION keys until “AUTO - CALIBRATION” appears.

To begin auto-calibration, press ENTER. The treadmill will run through minimum and maximum speed and maximum incline. This will take 3-5 minutes. Let the treadmill perform this complete function before exiting the Engineering Mode.

Elevation A/D appears in the left window. PWM value appears in the dot matrix window, and speed appears in the right window. “CALIBRATION PASSED” will appear in the alphanumeric window when the auto-calibration is complete. The treadmill will come to a complete stop and return to the start-up screen in the alphanumeric window.

500 South CP Avenue • P.O. Box 280 • Lake Mills, WI 53551

toll free 800.335.4348 • phone 920.648.4090 • fax 920.648.3373 www.visionfitness.com

A s s e m b l y G u i d e

T9800 Series

TREADMILLS

♥2007 Vision Fitness. All Rights Reserved. 5.07 AG18.39PRD

REV7