Vision Fitness X6150 manual X6250HRT Engineering Mode, Entering and Using Engineering Mode

X 6 2 5 0 H R T

X6250HRT ENGINEERING MODE

Engineering consists of optional settings and information used by service technicians to assure your product is working in proper order. There are also several default settings that allow you to customize the incline elliptical trainer to fit your needs.

ENTERING AND USING ENGINEERING MODE

•Press and hold the UP ▲ and DOWN ▼ RESISTANCE ARROW keys simultaneously for three seconds.

•The console will beep and bring you into engineering mode. Use the UP ▲ and DOWN ▼ RESISTANCE ARROW keys to scroll through the various engineering options.

•Press the ENTER key to select the appropriate engineering option.

•Use the UP ▲ and DOWN ▼ RESISTANCE ARROW keys within each setting to modify the setting

•Press the ENTER key to save the setting.

•To exit engineering mode, press and hold the START key for three seconds.

ENGINEERINGOPTIONS INCLUDE:

S E T T I N G

HARDWARE TEST

	LED TEST
	DEF TIME SET
	DEF LEVEL SET
	DEF AGE SET
	BEEPER MODE
	SPEED MODE
	MACHINE MODE
26	DOT DISP MODE

ACC TIME

ACC DIST

INCLINE TEST

AUTO-CALIBRATE

D E S C R I P T I O N

TEST USED BY SERVICE TECHNICIANS TO TEST ECB SYSTEM

TEST USED BY SERVICE TECHNICIANS TO TEST LED DISPLAY

SET THE DEFAULT WORKOUT TIME

SET THE DEFAULT RESISTANCE LEVEL

SET THE DEFAULT USER AGE

TURN THE BEEPER ON OR OFF

SET THE FEEDBACK INFO TO ENGLISH (MILES) OR METRIC (KILOMETERS)

SET TO BIKE, ELLIPTICAL TRAINER, OR INCLINE ELLIPTICAL TRAINER

SET DOT MATRIX DISPLAY WHEN NOT IN USE

MEASURES TOTAL TIME IN HOURS OF USE

MEASURES TOTAL DISTANCE TRAVELED ON THE UNIT

TESTS AT ZERO, MIN., AND MAX.

AUTO-CALIBRATION OF ELEVATION MOTOR TO SET MIN, MAX AND ZERO POSITIONS