ADJUSTING THE SETTINGS ON THE SCAN MANAGER 46
4. If the dotted line is not exactly where you want it, put the pointer
on the line and drag the mouse.
To use the pointer to drag the line, make sure the pointer button is
selected at the top of the window.
5. To rotate the selected area 90 degrees, click Rotate 90 Degrees.
6. To maintain the selected area’s length-to-width relationship (known
as the aspect ratio), click Maintain Aspect.
Note that as you rotate the area or maintain its aspect ratio, the
width and height measurements change to reflect the new
orientation of the image.
7. When the settings are what you want, click Scan.
8. If you want to remove the selected area and start over, click Remove
on the Scan Info box.
Scan Info for the
area selected on
the image.
The area you selected to scan.