Visioneer 9320 manual Scanning From A Computer Running Windows Xp Or Me, To scan an item

SCANNING FROM THE PAPERPORT SOFTWARE 27

SCANNING FROM A COMPUTER RUNNING WINDOWS XP OR ME

If your computer is running the Windows XP or ME operating system, you have a choice of scanning using the TWAIN-compliant Scan Manager Pro software as described starting on page 18, or scanning using the Microsoft Windows Image Acquisition (WIA) standard as described below.

Note: To scan transparencies you must scan from PaperPort (or other TWAIN software). See “Scanning 35mm Slides and Negatives” on page 23 for details.

To scan an item:

1.Open the scanner cover and place an item face down on the glass. Align the edge of the item with the arrow above the upper-left corner of the glass and then close the cover.

2.On the Windows taskbar, click Start, point to Programs, point to ScanSoft PaperPort 9.0, and then click PaperPort.

The PaperPort desktop opens.

3.Click the Scan icon on the PaperPort command bar. The Folders pane is replaced by the Scan pane.

4.From the Scanner drop-down list, select WIA - Visioneer 9320 Scanner.

5.In the “Scan what?” section, choose Document or Photograph.

6.Click Settings to view, and optionally change the format for the scanned item’s file name and the file type.

7.Use the Single page items check box as follows:

■When the check box is selected, pages are scanned and placed on the PaperPort desktop.

■When the check box is not selected, pages are scanned but not placed on the PaperPort desktop until you close the Scan Manager and indicate the scanning job is finished.