34VISIONEER ONETOUCH 9320 USB SCANNER INSTALLATION GUIDE
CREATING NEW CONFIGURATIONS
You cannot change settings of the preset (default) configurations. If you want to scan with settings other than those in the preset configurations, create a new configuration. You can do this either by copying a preset configuration and making the desired changes or by creating a new configuration from scratch. The new configuration is saved in the Select Configuration list so you can use it again.
To create a new configuration:
1.Open the Configuration dialog box.
2.Select the tab that corresponds to the button for which you are creating the new configuration.
3.Scroll the applications in the Select Destination list and click an application to associate the new configuration with.
4.Do one of the following:
■Click the New button.
■Select a preset configuration and click the Copy button.
5.On the New Scan Configuration dialog box, type a name for the new configuration.
■If you are copying from a preset configuration, leave the name as is or change it as required.
