Vivitar 8300s Setup Menu (Custom tab)

Digital Camera >>
EN-70
Setup Menu (Custom tab)
1. Slide the mode switch to [ ] and set the
mode dial to [ ].
2. Select the [Custom] menu with the X button.
The [Custom] tab of the set-up menu
is displayed.
3. Select the desired [Custom] option item with
theS/T buttons, and press the SET button
to enter its respective menu.
4. Select the desired setting with the S/T
buttons, and press the SETbutton.
5. To exit from the set-up menu, change the
mode dial setting.
Date/Time
This sets the date and the time.
Refer to the section in this manual titled “Setting the Date and Time” for further details.
Sys. Reset
This returns all basic settings to the ViviCam 8300s’s default settings. Note that the
date and time setting will not be reset, however.
* Cancel / Execute
Language
This sets the language that is displayed on the LCD monitor.
Refer to the section in this manual titled “Choosing the OSD Language” for further details.
Video Output
This sets video output standard of the ViviCam 8300s so you may connect your
ViviCam 8300s to video equipment.
* NTSC / PAL
System Info.
This displays the firmware version of the ViviCam 8300s.