User’s Manual >>
EN-27
OFF

Setting Image Resolution and Quality

Resolution and quality settings determine the pixel size (dimension), image file size,
and compression ratio for your images. These settings affect the number of images
that can be stored on a memory card. As you get to know the ViviCam 8300s, it is
recommended that you try each quality and resolution setting to get an appreciation
for the effects that these settings will have on your images.
Higher resolution and higher quality images offer the best photographic results, but
produce large file sizes. Therefore, few images will take up a lot of memory space.
High resolution and quality settings are recommended for printed output and situations
requiring the finest detail. Lower resolution/quality images take up less memory
space and may be quite suitable for sharing images via e-mail, in a report, or on a
web page.
To change image resolution or image quality, perform these steps below:
1. Slide the mode switch to [ ] and set the mode dial
to one of the photography modes.
2. Press the MENUbutton.
[Capture] of the photography menu is displayed.
3. Select [Size] with the S/T buttons, and press
theSET button.
4. Select the desired setting with the S/T
buttons, and press the SETbutton.
5. Select [Quality] with the S/T buttons, and press
theSET button.
6. Select the desired setting with the STbuttons,
and press the SETbutton.
7. To exit from the photography menu, press the
MENUbutton.
FunctionPicture AE/AWB
Size
Quality
Sharpness
Contrast
Color
3264x2448
2568x1920
1600x1200
640x480
Standard
Capture
3296x2472
Saturation
White Balance Auto
Auto
Capture
Auto