Select Mute State:
Muted or Unmuted.
Select Single
or Redundant Mode.Select BUC Source Reference: Internal,
External, Auto.
Select HPA1
or HPA2.
Select Startup State: Online or Standby.
Select Standby
Mode: Hot or Cold
Standby.
Select Attenuation; Click ‘Change’ to set.
Select Network Address; Click ‘Change’ to set.
Figure 3-20: General Settings window descriptions
•General Settings Window: Displays the SSPA Redundancy and BUC/Amplifier Settings. See Figure
•Adjust Redundancy settings;
•Mute/Unmute amplifier;
•Adjust Attenuation;
•Change Network Address;
Note: The Compact Outdoor SSPA initially starts up in the Muted state; Change the Mute Setting in the General Settings tab to enable Transmit RF.
Operations Manual, HPA3, Mini Compact Outdoor SSPA | 208143 REV - | 39 |