Paradise RA 5785 manual 3.3Universal M&C Operation, 7 Universal M&C Add Unit menu

3.3Universal M&C Operation

1.Run the Paradise Datacom Universal Monitor and Control Program from the Programs Menu of your PC.

2.Select [Action] → [Add Unit] from the main menu of the Universal M&C Program and select [Mini Compact Outdoor SSPA] from the menu choices. See Figure 3-7.

Figure 3-7: Universal M&C Add Unit menu

3.A new dialog window will open (see Figure 3-8). Enter the following information where applicable: Unit ID; if using a RS-232 Connection, the Serial Port and Baud Rate; or if using an Ethernet Connection, the unit’s IP Address.

Serial connection ►		◄ Internet connection
	192.168.0.9

Figure 3-8: Add Compact Outdoor SSPA window, via Serial (left) or Internet (right)

4.Specify the unit’s Address in the Amplifier Address box. If you don’t know the address of the unit you may search for it. Be aware that this search feature is only useful when you have only one unit connected to your PC at a time.

5.If you wish to change the log file location, click on the [Browse] button and navigate to the desired location. See Section 3.3.4 for more information about the log file.

6.Click on the [Create] button to generate the operation window for this unit.

28 208143 REV - Operations Manual, HPA3, Mini Compact Outdoor SSPA