3.3.4 Universal M&C Preferences
The user can adjust certain preferences of the Universal Monitor and Control Software. See Figure
Figure 3-13: Preferences Window
Queries: Enable and adjust the interval that the software queries the unit. Note that if queries are disabled, there will be no communication with the unit at startup.
Logs: Enable and adjust the interval that the software writes to the log. The log location is determined during unit setup. Each entry catalogs the RF Power Level and Temperature of the unit. See Figure
Figure 3-14: Example, Log entry
TCP/IP: Select the Local UDP Port (the software must be restarted to take effect). Note that each UDP address must be unique.
Appearance: Set the transparency of the M&C Windows.
Startup: Enable or disable
Operations Manual, HPA3, Mini Compact Outdoor SSPA | 208143 REV - | 35 |