Paradise RA 5785 manual Setting IPNet interface, Troubleshooting IP connectivity

8.2.2.2 Setting IPNet interface

To set up the Compact Outdoor SSPA with custom IP parameters, the internal IP settings need to be modified by using Paradise Datacom’s Universal M&C, version 4.4.3 or later. See Section 3.3.3.

8.2.2.3 Troubleshooting IP connectivity

Check IP connectivity to the SSPA unit. To do so on a Windows-based PC, open a Command Prompt window and type the following command: PING 192.168.0.9, then press the Enter key. If the unit is successfully found on the network, the request statistic will be displayed.

Microsoft Windows XP [Version 5.1.2600]

(C)Copyright 1985-2001 Microsoft Corp. C:\Ping 192.168.0.9

Pinging 192.168.0.9 with 32 bytes of data:

Reply from 192.168.0.9: bytes=32 time<1ms TTL=128

Reply from 192.168.0.9: bytes=32 time<1ms TTL=128

Reply from 192.168.0.9: bytes=32 time<1ms TTL=128

Reply from 192.168.0.9: bytes=32 time<1ms TTL=128

Ping statistics for 192.168.0.9:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms

If this step is successfully completed, a default Ethernet connection is set and ready to use.

If the unit does not answer on the ping command, check all hardware connections. Consult your network administrator for further details.

72 208143 REV - Operations Manual, HPA3, Mini Compact Outdoor SSPA