Section 6: Maintenance and Troubleshooting | 53 | |
6.0 | Introduction | 53 |
6.1 | Cooling System Maintenance | 53 |
6.2 | Fan Removal and Heatsink Cleaning | 53 |
6.2.1 Fan Replacement | 53 | |
6.3 | Troubleshooting guide | 54 |
| 6.3.1 Unit doesn’t power up | 51 |
| 6.3.2 Unit powers on, LED lamp glows red | 54 |
| 6.3.3 SSPA unit powers up, LED lamp glows green, no RF output present | 54 |
| 6.3.4 Cannot connect to SSPA through remote control interface | 54 |
| 6.3.5 The FSK link between a modem and the SSPB unit is not working | 55 |
Section 7: Redundant System Operation | 57 | |
7.0 | Redundant System Concepts | 57 |
7.1 | 1:1 Redundant Systems | 57 |
7.2 | 1:2 Redundant Systems | 58 |
Section 8: Remote Control Interface | 59 | |
8.0 | Serial Protocol Overview | 59 |
8.1 | Serial communication | 61 |
| 8.1.1 Header Packet | 61 |
| 8.1.1.1 Frame Sync Word | 61 |
| 8.1.1.2 Destination Address | 61 |
| 8.1.1.3 Source Address | 62 |
| 8.1.2 Data Packet | 62 |
| 8.1.2.1 Protocol ID | 62 |
| 8.1.2.2 Request ID | 62 |
| 8.1.2.3 Command | 62 |
| 8.1.2.4 Data Tag | 63 |
| 8.1.2.5 Data Address / Error Status / Local Port Frame Length | 64 |
| 8.1.2.6 Data Length | 64 |
| 8.1.2.7 Data Field | 64 |
| 8.1.3 Trailer Packet | 65 |
| 8.1.3.1 Frame Check | 65 |
| 8.1.4 Timing issues | 65 |
| 8.1.5 Serial Communications Protocol | 66 |
8.2 | Ethernet Interface | 70 |
| 8.2.1 Overview | 70 |
| 8.2.2 IPNet Interface | 70 |
| 8.2.2.1 General Concept | 70 |
| 8.2.2.2 Setting IPNet interface | 72 |
| 8.2.2.3 Troubleshooting IP connectivity | 72 |
| 8.2.3 SNMP interface | 73 |
| 8.2.3.1 SNMP MIB tree | 74 |
| 8.2.3.2 Description of MIB entities | 75 |
8.3 M&C via SNMP | 79 | |
| 8.3.1 Connecting to a MIB browser | 80 |
Appendix A: Documentation | 81 |
Operations Manual, HPA3, Mini Compact Outdoor SSPA | 208143 REV - | 5 |