Sharp AR-203E X operation manual Button Manager Settings

3 Button Manager Settings

After being installed, Button Manager normally keeps active under the Windows operating system. Follow the steps shown below to set scan options as you like.

For details on the settings in the setting screen of Button Manager, see Button Manager Help.

1 Rightbar. -click the Button Manager icon () on the task

If the Button Manager icon does not appear on the task bar, click the "start" button, select "All

Programs" ("Programs" on Windows 98/Me/2000), Note select "SHARP Button Manager S", and then click

"Button Manager" to start Button Manager.

	2	Select "Settings" from the displayed pop-up menu.
		The setting screen of Button Manager will open.
Reference:"Outline of Button Manager" (p.23)
	3	Click the tab of the scan menu you want to set up.

	4		Set up the start-up application in the "Application
			Selection" area.
			When the "Show TWAIN setting screen when
			scanning" checkbox is selected, the scan setting
			screen appears when scanning is executed to let
		Note you adjust the scanning conditions.
Reference:"Outline of Button Manager" (p.23)
	5		Set up the "Colour Mode", "Edge" and other scan
			settings in the "Scan Setup" area.
Reference:"Outline of Button Manager" (p.23)
	6		Click the "OK" button.
			You have completed the settings.

24