Preparing Your Camera For Use

Battery Installation

Your camera requires two AAA alkaline batteries, which must be inserted as follows:

1.Slide open the battery compartment at the bottom of the camera.

2.Insert the batteries in accordance with the polarity (+/-) shown on the inside of the cover.

3.Close the battery compartment.

The LCD display screen will ￿ash if your batteries are running low in which case you will need

to replace the camera’s batteries before taking photos. When the batteries get very low on power, the LCD display screen will display “Lo” and then automatically switch o￿.

Note: If you do not intend to use your camera for an extended period, remove the batteries to avoid leakage and corrosion.

Warning:

Please download any photos you have on the camera before opening the battery compartment.

Opening the battery compartment and/or removing the battery will erase the photos currently stored in the camera.

Download your photos as often as possible. Photos may be lost when the batteries run low.

-6-

Page 7
Image 7
Vivitar VIV-CV-1025V instruction manual Preparing Your Camera For Use