Starting Your Camera
Press and hold down the mode button (for about 2 seconds) to start the camera.
•The camera will sound a beep to confirm that it is ready for use.
•The LCD display will indicate the number of photos that can be taken before it becomes necessary to download them to your PC.
Taking Photos
1.Compose your shot using the viewfinder. Be sure to keep the camera very still to avoid blurriness.
2.Hold the camera steady and press the shutter button to take a photo.
3.The camera will beep when a photo is taken.
If the camera fails to beep or if a "0" appears on the LCD this is an indication that the memory is full in which event no further photos can be taken until the existing photos have been downloaded or cleared from the camera’s memory.
Note: The LCD display indicates how many photos may still be taken at the current resolution and compression. E.g. In "Lr" resolution and "CP" compression 160 images may be taken. However the LCD counter only displays up to 99. It will continue to display 99 until less than 99 images may still be taken.
