5
Cleaning & Maintenance
Cleaning the Screen
The screen of the RPTV has been specially treated.To clean users should wipe the surface gently using only a
cleaning or a soft, lint-free cloth. If the surface is particularly dirty,use a little water on the cloth (never directly on
the screen), then wipe the screen with it.
Reminders:
Do not use substances such as glass cleaners, solvents and/or thinners.
Do not scratch or hit the surface of the screen with fingers or any hard objects.
The screen of the RPTV is made of specially coated plastic and can be scratched or damaged by abrasive or
ammonia-based window cleaners. Scratches on the bezel or screen are not covered by the warranty.
Cleaning the Exterior
The RPTV is cooled by air circulated through the vents in the case so for optimized performance, keep the vents
clear of dust.To clean, turn off and unplug the RPTV, then brush the dust away from the vents with a damp cloth.
Be careful not to drip any water into the vents.
Reminders:
Do not attempt to clean dust from the inside of the RPTV.
Do not use abrasives or solvent cleaners because they can damage the finish on the components.
Do not allow any excessive water or moisture to come into contact with the surface of the DLPTV. If water or
moisture gets inside the RPTV,operating problems and electrical hazards may result.
Do not scratch or hit the surface of the screen with fingers or any hard objects.
Do not place articles made of rubber or PVC near the cabinet for any extended periods of time.