Vivitek IB8156-C user manual Event setting, Group eventi0~2

URL Command Document for IB8156

7.20 Event setting

Group: event_i<0~2>

PARAMETER	VALUE	Default	SECURITY	DESCRIPTION
			(get/set)
name	string[40]	NULL	6/6	Identification of this entry.
enable	0, 1	0	6/6	Enable or disable this event.
priority	0, 1, 2	1	6/6	Indicate the priority of this event:
				“0” = low priority
				“1” = normal priority
				“2” = high priority
delay	1~999	20	6/6	Delay in seconds before detecting the
				next event.
trigger	boot,	boot	6/6	Indicate the trigger condition:
	motion,			“boot” = System boot
	seq,			“motion” = Video motion detection
	recnotify,			“seq” = Periodic condition
	tampering,			“recnotify” = Recording notification.
	vi			“tampering” = Tamper detection.
				“vi”= Virtual input (Manual trigger)
triggerstatus	String[40]	triggerstatus	6/6	The status for event trigger
vi	<integer>	0	6/6	Indicate the source id of vi trigger.
				This field is required when trigger
				condition is “vi”.
				One bit represents one digital input.
				The LSB indicates VI 0.
mdwin	<integer>	0	6/6	Indicate the source window id of
				motion detection.
				This field is required when trigger
				condition is “md”.
				One bit represents one window.
				The LSB indicates the 1st window.
				For example, to detect the 1st and 3rd
				windows, set mdwin as 5.
mdwin0	<integer>	0	6/6	Similar to mdwin. The parameter
				takes effect when profile 1 of motion
				detection is enabled.

User's Manual - 165