VIVOTEK

Joystick Settings

Enable Joystick

Connect to the USB plug of the joystick to a USB port on your management computer. Supported by the plug-in in the main page (Microsoft’s DirectX), once the plug-in in the main page is loaded, it will automatically detect if there is any joystick on the computer. The joystick should work properly without installing any other driver or software.

Then you can begin to configure the joystick settings of connected devices. Please follow the instructions below to enable joystick settings.

1.Right-click on a live view window. Select Joystick Settings. If your joystick is working properly, it will be displayed on the drop-down list.

2.Select the joystick you want to configure. Check Enable Joystick, then click Configure Buttons to open Buttons configuration window.

NOTE:

If you want to assign Preset actions to your joystick, the preset locations should be configured in advance in the Configuration > PTZ page.

If your joystick is not working properly, it may need to be calibrated. Click the Calibrate button to open the Game Controllers window located in Microsoft Windows control panel and follow the instructions for trouble shooting.

The joystick will appear in the Game Controllers list in the Windows Control panel. If you want to check out for your devices, go to the following page: Start -> Control Panel -> Game Controllers.

User's Manual - 29

Page 29
Image 29
Vivitek IB8156-C user manual Joystick Settings