Vivitek IB8156-C user manual Set Server Parameter Values

VIVOTEK

URL Command Document for IB8168

6. Set Server Parameter Values

Note: The access right depends on the URL directory.

Method: GET/POST

Syntax:

http://<servername>/cgi-bin/anonymous/setparam.cgi? <parameter>=<value> [&<parameter>=<value>…][&return=<return page>]

http://<servername>/cgi-bin/viewer/setparam.cgi? <parameter>=<value> [&<parameter>=<value>…][&return=<return page>]

http://<servername>/cgi-bin/operator/setparam.cgi? <parameter>=<value> [&<parameter>=<value>…][&return=<return page>]

http://<servername>/cgi-bin/admin/setparam.cgi? <parameter>=<value> [&<parameter>=<value>…][&return=<return page>]

	PARAMETER	VALUE	DESCRIPTION
	<group>_<name>	value to assigned	Assign <value> to the parameter <group>_<name>.
	return	<return page>	Redirect to the page <return page> after the parameter is
			assigned. The <return page> can be a full URL path or
			relative path according to the current path. If you omit this
			parameter, it will redirect to an empty page.
			(Note: The return page can be a general HTML file
			(.htm, .html). It cannot be a CGI command or have any
			extra parameters. This parameter must be placed at the end
			of the parameter list
	Return:
	HTTP/1.0 200 OK\r\n
	Content-Type: text/html\r\n
	Context-Length: <length>\r\n
	\r\n
	<parameter pair>
	where <parameter pair> is
	<parameter>=<value>\r\n
	[<parameter pair>]
202 - User's Manual