Vivotek FD8167-(T) user manual IR cut control, Image setting per channel, Group ircutcontrol

URL commands for FD8167VIVOTEK

URL Command Document for All Series

7.10 IR cut control

Group: ircutcontrol

NAME		VALUE		DEFAULT		SECURITY	DESCRIPTION
						(get/set)
mode	auto,		auto		6/6		Set IR cut control mode
		day,
		night,
		di,
		schedule

sir	<boolean>	0	6/6	Enable/disable Smart IR
daymodebegintime	00:00~23:59	07:00	6/6	Day mode begin time
daymodeendtime	00:00~23:59	18:00	6/6	Day mod end time
disableirled	<boolean>	0	6/6	Enable/disable built-in IR led
bwmode	<boolean>	1	6/6	Switch to B/W in night mode if
				enabled
sensitivity	low,	normal	6/6	Sensitivity of light sensor
	normal,
	high

7.11 image setting per channel

Group: image_c<0~(n-1)>for n channel products

NAME		VALUE		DEFAULT		SECURITY		DESCRIPTION
						(get/set)
brightness	-5 ~ 5		0		4/4		Adjust brightness of
							image according to
							mode settings.
saturation	-5 ~ 5, 100		100		4/4		Adjust saturation of
								image according to
								mode settings.
saturationpercent	0~100		50		4/4			Adjust saturation
								value of percentage
								when saturation=100
contrast	-5 ~ 5		0		4/4			Adjust contrast of
								image according to
								mode settings.

31 User's Manual - 165