Vivotek FD8167-(T) user manual IP Filtering

URL commands for FD8167VIVOTEK

URL Command Document for All Series

relative path according to the current path.

8.11 IP Filtering

Note: This request requires Administrator access privileges.

Method: GET/POST

Syntax:

http://<servername>/cgi-bin/admin/ipfilter.cgi?

method=<value>&[start=<ipaddress>&end=<ipaddress>][&index=<value>] [&return=<return page>]

PARAMETER	VALUE	DESCRIPTION
method	addallow	Add allowed IP address range to the server. Start and end
		parameters must be specified. If the index parameter is
		specified, it will try to add starting from the index position.
	adddeny	Add denied IP address range to the server. Start and end
		parameters must be specified. If the index parameter is
		specified, it will try to add starting from the index position.
	deleteallow	Remove allowed IP address range from server. If start and
		end parameters are specified, it will try to remove the
		matched IP address. If index is specified, it will try to remove
		the address from given index position. [start, end] parameters
		have higher priority then the [index] parameter.
	deletedeny	Remove denied IP address range from server. If start and end
		parameters are specified, it will try to remove the matched IP
		address. If index is specified, it will try to remove the address
		from given index position. [start, end] parameters have higher
		priority then the [index] parameter.
start	<ip address>	The starting IP address to add or to delete.
end	<ip address>	The ending IP address to add or to delete.
index	<value>	The start position to add or to delete.
return	<return page>	Redirect to the page <return page> after the parameter is
		assigned. The <return page> can be a full URL path or
		relative path according to the current path. If you omit this
		parameter, it will redirect to an empty page.

77 User's Manual - 211