Manuals / Vivotek / Household Appliance / Home Security System

Vivotek FD8167-(T) user manual Open Anystream

Models: FD8167-(T)

1 322

Download 322 pages 57.65 Kb

Page 223

8.18 Open Anystream

VIVOTEK

URL commands for FD8167

URL Command Document for All Series

request.

Ex: Request the streaming from 12:20

rtsp://10.0.0.1/live.sdp?maxsft=10&reftime=12:30

forcechk

N/A

N/A

Check if the requested stream enables timeshift, feature

and if minsft is achievable.

If false, return “415 Unsupported Media Type”.

minsft

<positive

0

How many seconds of cached stream client can accept

integer>

at least.

(Used by forcechk)

Return Code

Description

400 Bad Request

Request is rejected because some parameter values are illegal.

415 Unsupported Media Type

Returned, if forcechk appears, when minsft is not achievable or the

timeshift feature of the target stream is not enabled.

8.18 Open Anystream

Note: This request requires Viewer access privileges.

Syntax:

For HTTP push server (MJPEG):

http://<servername>/videoany.mjpg?codectype=mjpeg[&resolution=<value>&mjpeg_quant=<value> &mjpeg_qvalue=<value>&mjpeg_maxframe=<value>]

For RTSP (MPEG4), the user needs to input the URL below into an RTSP compatible player.

rtsp://<servername>/liveany.sdp?codectype=mpeg4[&resolution=<value>&mpeg4_intraperiod=<valu e>&mpeg4_ratecontrolmode=<value>&mpeg4_quant=<value>&mpeg4_qvalue=<value>&mpeg4_bit rate=<value>&mpeg4_maxframe=<value>]

For RTSP (H264), the user needs to input the URL below into an RTSP compatible player.

rtsp://<servername>/liveany.sdp?codectype=h264[&resolution=<value>&h264_intraperiod=<value>& h264_ratecontrolmode=<value>& h264_quant=<value>& h264_qvalue=<value>& h264_bitrate=<value>& h264_maxframe=<value>]

<product dependent>

PARAMETER		VALUE		DEFAULT		DESCRIPTION
codectype		mjpeg, mpeg4, h264		N/A		Set codec type for Anystream.
		<product dependent>
solution		capability_videoin_resolution		<product		Video resolution in pixels.
				dependent>

89	User's Manual - 223

Image 223

Vivotek FD8167-(T) user manual Open Anystream

Contents

Rev. VIVOTEK Table of ContentsUsers Manual - VIVOTEKRevision History OverviewSymbols and Statements in this Document Package ContentsRead Before Use VIVOTEK DI/DO Diagram6 - Users Manual Item Hardware ResetMicro SD/SDHC/SDXC Card Capacity LED Definitionshalf-wayinto the wall Installation FD81673. Attach the alignment sticker to wall and drill holes on it. Fasten 3 screws121 5M 77.3 5M 10 - Users Manual 123456789#Name 1 N/C 2 N/C 3 Audio_out 4 Audio_out+ 5 DI 6 DI+ 7 DO 8 DO+ 9 12V DC-_IN 10 12V DC+_IN7. Assigning an IP Address 12 - Users Manual Installation FD83673.Remove the waterproof connectors 34 5 614 - Users Manual #Name 1Audio_MIC_N 2EXT_MIC_P 3Audio_out4Audio_out+ 5DI 6DI+ 7DO 8DO+ 912V DC-_IN 1012V DC+_INUsers Manual - VIVOTEKPage 12. Assigning an IP Address For the outdoor models General Connection without PoE Power over Ethernet PoEWhen using a PoE-enabledswitch Network Deployment20 - Users Manual When using a non-PoEswitchPOWER VIVOTEKInternet connection with static IP Internet connection via a routerDevice Network Camera Software InstallationReady to Use Using Web Browsers Accessing the Network CameraPage Tips Using RTSP Players Using 3GPP-compatibleMobile Devices 30 - Users Manual Using VIVOTEK Recording SoftwareCamera Control Area Main PageVIVOTEK INC. Logo Host NameLive Video Window Configuration AreaHide Button Resize Buttons3.Below are the defaults for the Audio settings bmp format page H.264 Media Options Client SettingsH.264 Protocol Options MP4 Saving Options Two Way AudioLocal Streaming Buffer Time Enable Joystick Joystick SettingsButtons Configuration 40 - Users Manual Navigation Area Configuration List ConfigurationFirmware Version System System > General settingsSystem time System > Homepage layout General settings44 - Users Manual Theme Options1. Click Custom on the left column 1.Select Enable remote log Log server settingsSystem > Logs System logSystem > Parameters Access logGeneral settings > Upgrade firmware System MaintenanceGeneral settings > Reboot Import/Export files General settings > RestoreWhen completed, save the file Applicable scenario TipsGeneral settings Media > ImageSwitch to B/W in night mode Day/Night SettingsIR cut filter TipsImage settings Exposure Exposure control 1.Check Enable this profile Focus window Fine-tunefocus and Full-ranagescan focus60 - Users Manual Focus windowPrivacy mask Media > Video Stream settingsClick Viewing Window to open the viewing region settings page. On this page, you can configure the Region of Interest and the Output Frame Size for streams 1. For example, you can crop only a portion of the image that is of your interest, and thus save the bandwidth needed to transmit the video stream. As the picture shown below, the area of your interest in a parking lot should the vehicles. The blue sky is of little value for the surveillance purpose MediaNOTE:> Video Frame size Video quality Constant bit rate Q= Good or better BackgroundForeground Q= Medium or lowBackground •ModeForeground Note the following with the Smart stream setting Frame size Media > Audio Audio SettingsNetwork Type Network > General settingsPPPoE Point-to-pointover Ethernet 74 - Users Manual NOTENOTE5. Click Next in the following window Link-localIPv6 address/network mask Enable IPv6Refers to Ethernet Link-globalIPv6 address/network mask1.Open your web browser America PortTaiwan Mute Mic VolumeAudio is being transmitted to the Network Camera Talk ButtonHTTP streaming Network > Streaming protocolsNOTENOTE RTSP StreamingPage Initial TTL Express link Network > DDNSDDNS: Dynamic domain name service Manual setupSafe100.net 86 - Users Manual CustomSafe100QoS models Network > QoS Quality of ServiceRequirements for QoS CoS the VLAN 802.1p model88 - Users Manual QoS/DSCP the DiffServ modelNetwork SNMP Simple Network Management Protocol SNMP ConfigurationAccount Management Root PasswordSecurity User Account Privilege ManagementCreate self-signedcertificate Create and Install Certificate MethodVIVOTEK https92 - Users Manual 1.Select this option from a method pull-downmenu 94 - Users Manual 1. Click on the Remove certificate button Enable HTTPSHow do I cancel the HTTPS settings? NOTENOTEGeneral Settings Security > Access ListFilter Administrator IP address The maximum length of password is 200 symbols Security > IEEEThe authentication process for Digital PTZ Operation E-PTZOperation PTZ > PTZ settingsx1.8 Home page in E-PTZMode x3.3x1.8 Patrol settings23 1 4 6 Page Event Event > Event settings2. Trigger Audio detection VADP 3. Action Add server Click Save server to enable the settings Passive mode The format is: YYYYMMDD Network storageThe format is: HH 24r Click 20140820to open the directoryThe format is: File name prefix + Minute mm Add media Add date and time suffix to the file name Maximum file size Page Click to upload a file Customized ScriptClick to modify the script online Applications Motion detection 2.Check Enable this profile How does motion detection work? spray paint 1.Check Enable camera tampering detectionApplications > DI and DO Applications > Tampering detectionApplications > Audio detection •If the Alarm level and the received volume are set within a range of 20% on the wave diagram, frequent alarms will be triggered. It is recommended to set the Alarm level farther apart from the detected sound level 126 - Users Manual Platformmuch of system resources 128 - Users Manual VIVOTEKNOTENOTE Recording > Recording settingsRecording Settings Recording SettingsPre-eventrecording and post-eventrecording NOTENOTE1 24 NAS server3.Enter a server name f you want to enable recording notification, please click Event to configure event triggering settings. Please refer to Event Event settings on page 105 for more details SD card control Local storage > SD card managementSD card staus SD card formatSearching and Viewing the Records Local storage > Content managementSearch Results For example 2. Style Convention URL Commands for the Network CameraAppendix 1. OverviewURL commands for FD8167VIVOTEK 3. General CGI URL Syntax and Parameters4. Security Level URL commands for FD8167Method: GET/POST 5. Get Server Parameter Valuesnetwork_ipaddress=192.168.0.123\r\n URL commands for FD8167URL Command Document for All Series Responsereturn 6. Set Server Parameter ValuesMethod: GET/POST <group>_<name>Response URL commands for FD8167URL Command Document for All Series Example: Set the IP address of server to Request7. Available parameters on the server URL commands for FD8167 7.1 systemGroup: system America, Central Time Mexico City, Saskatchewan URL commands for FD8167 daylight_timezones 7.1.1 system.info Group: status 7.2 statusGroup di i 0~ndi-1 7.3 digital input behavior define7.4 digital output behavior define 7.5 PIR detection behavior define7.7 network 7.6 securityGroup: security Subgroup of network: ieee8021x 7.7.1Subgroup of network: qos_cos 7.7.2 QOSSubgroup of network qos dscp Subgroup of network: ipv6 7.7.3 IPV67.7.4 FTP 7.7.5 HTTP7.7.7 RTSP 7.7.6 HTTPS port7.7.7.1 RTSP multicast 7.8.1ipfilter for ONVIF 7.8IP Filter7.7.8 RTP port 7.7.9 PPPoE7.9 video input URL commands for FD8167 7. 9.1 video input setting per channeltextonvideo_position s<0~m-1>_mjpeg_priorit s<0~m-1>_mjpeg_bitrate Group: videoin_profile_i<0~m-1> URL commands for FD81677.10 IR cut control 7.11 image setting per channelGroup: ircutcontrol gammacurve 7.12 Audio input per channel 7.14 Motion detection settings 7.13 Time Shift settingswin i 0~2 height Group tampering c 0~n-1 for n channel product 7.15 Tampering detection settings7.16 DDNS URL commands for FD8167Group: upnppresentation 7.16.1 Express link7.17 UPnP presentation 7.18 UPnP port forwarding7.20 SNMP 7.19 System logURL commands for FD8167 Group layout 7.21 Layout configurationvivotek.co 7.23 Capability 7.22 Privacy maskGroup: capability <positive integer> URL commands for FD8167VS8102: 0b10111101 0/99 video mode audio_lineout network_wireless 0/99 remotecamctrl_master manual No Iris control support URL commands for FD8167 7.24 WebAPI: Information for a channel7.25 WebAPI: Information for a mode binning 7.26 Customized event script 7.27 Event settingGroup: event_customtaskfile_i<0~2> Indicate the source id of di trigger action_do_i<0~ndo-1 URL commands for FD8167 7.28 Server setting for event actionGroup: server_i<0~4> 7.29 Media setting for event action URL commands for FD8167 7.30 RecordingGroup recording i 0~1 weekday Unit Mega bytes 7.31 HTTPSWhen this condition is reached When this condition is reached7.33 Region of interest 7.32 Storage management settingURL commands for FD8167 7.34 ePTZ settingGroup eptz c 0~n-1 for n channel product 7.35 Exposure window setting per channel Group seamlessrecording 7.36 Seamless recording settingGroup: vadp Group: vadp_module_i<0~n-1> 8.1 Drive the Digital Output 8. Useful Functions8.2 Query Status of the Digital Input URL commands for FD8167 8.3 Query Status of the Digital Output8.4 Capture Single Snapshot URL commands for FD8167 8.5 Account Management8.6 System Logs 8.7 Upgrade FirmwareURL commands for FD8167 8.8 ePTZ Camera Controlzoom 8.9 ePTZ Recall 8.10 ePTZ Preset LocationsURL commands for FD8167 8.11 IP Filtering URL commands for FD8167 8.11.1 IP Filtering for ONVIF8.12 Event/Control HTTP Tunnel Channel Method: GET 8.13 Get SDP of Streams8.14 Open the Network Stream URL commands for FD81678.15 Storage managements isLocked 8.15.1 Return Message Element name PARAMETER Command: queryStatusEx. Local storage status in XML format Ex. Local storage status in javascript formatretType URL commands for FD81678.16 Virtual input timeshift_c<n>_s<m>_allow=1 8.17 Open Timeshift Stream timeshift enable=1URL commands for FD8167 8.18 Open Anystream mjpeg_quant h264_ratecontrolmode URL commands for FD8167 8.19 Export FilesMethod: POST 8.20 Upload FilesURL commands for FD8167 8.21 Media on demand3. General CGI URL Syntax and Parameters URL commands for FD83674. Security Level URL commands for FD8367230 - Users Manual Method: GET/POST 5. Get Server Parameter Values232 - Users Manual URL commands for FD8367URL Command Document for All Series VIVOTEKreturn 6. Set Server Parameter ValuesMethod: GET/POST <group>_<name>234 - Users Manual URL commands for FD8367URL Command Document for All Series VIVOTEK7. Available parameters on the server URL commands for FD83677.1 system URL commands for FD8367236 - Users Manual Page URL commands for FD8367 URL commands for FD8367 combined results 7.1.1 system.info7.2 status URL commands for FD8367242 - Users Manual 7.3 digital input behavior define7.4 digital output behavior define 7.5 PIR detection behavior define7.7 network 7.6 securityGroup: security Subgroup of network: ieee8021x 7.7.1244 - Users Manual Subgroup of network: qos_cos 7.7.2 QOSSubgroup of network qos dscp 246 - Users Manual 7.7.3 IPV67.7.4 FTP 7.7.5 HTTP7.7.7 RTSP 7.7.6 HTTPS port7.7.7.1 RTSP multicast 7.8.1ipfilter for ONVIF 7.8IP Filter7.7.8 RTP port 7.7.9 PPPoE7.9 video input URL commands for FD8367URL commands for FD8367 7. 9.1 video input setting per channel250 - Users Manual URL commands for FD8367 252 - Users Manual URL commands for FD8367URL commands for FD8367 254 - Users Manual URL commands for FD83677.10 IR cut control 7.11 image setting per channelNAME gammacurve according to mode 7.12 Audio input per channel7.14 Motion detection settings 7.13 Time Shift settings258 - Users Manual URL commands for FD8367 260 - Users Manual 7.15 Tampering detection settingsURL commands for FD8367 7.16 DDNSGroup: upnppresentation 7.16.1 Express link7.17 UPnP presentation 7.18 UPnP port forwarding262 - Users Manual URL commands for FD83677.19 System log 7.20 SNMPURL commands for FD8367 7.21 Layout configurationvivotek.co 264 - Users Manual 7.22 Privacy maskNAME 7.23 Capabilitynaudiosetting 1external integer videoin_codec <boolean> supported support joystick control 0/99 vadp etailed,goo 7.24 WebAPI: Information for a channel URL commands for FD8367PARAMETER mjpeg maxbitrate 7.25 WebAPI: Information for a modebinning 7.26 Customized event script 7.27 Event settingGroup: event_customtaskfile_i<0~2> 280 - Users Manual URL commands for FD8367URL commands for FD8367 URL commands for FD8367 7.28 Server setting for event action282 - Users Manual URL commands for FD8367 7.29 Media setting for event action7.30 Recording URL commands for FD8367284 - Users Manual URL commands for FD8367 286 - Users Manual 7.31 HTTPSURL commands for FD8367 7.32 Storage management setting7.33 Region of interest URL commands for FD8367 7.34 ePTZ setting288 - Users Manual 7.35 Exposure window setting per channel 290 - Users Manual 7.36 Seamless recording settingURL commands for FD8367 NAME 8.1 Drive the Digital Output 8. Useful Functions8.2 Query Status of the Digital Input 8.3 Query Status of the Digital Output URL commands for FD8367294 - Users Manual Method: GET/POST 8.4 Capture Single Snapshot8.5 Account Management URL commands for FD83678.6 System Logs 8.7 Upgrade FirmwareMethod: GET/POST 8.8 ePTZ Camera Control URL commands for FD8367298 - Users Manual URL commands for FD8367 300 - Users Manual 8.10 ePTZ Preset LocationsURL commands for FD8367 8.9 ePTZ Recallrelative path according to the current path 8.11 IP Filtering8.11.1 IP Filtering for ONVIF URL commands for FD8367PARAMETERVALUE typeNULL allow, deny method addv4 8.12 Event/Control HTTP Tunnel Channel URL commands for FD8367304 - Users Manual URL commands for FD83678.13 Get SDP of Streams 8.14 Open the Network Stream8.15 Storage managements URL commands for FD8367306 - Users Manual URL commands for FD83678.15.1 Return Message URL commands for FD8367308 - Users Manual URL commands for FD8367Ex. Local storage status in javascript format URL commands for FD8367Command: queryStatus Ex. Local storage status in XML format310 - Users Manual URL commands for FD8367Note: Change virtual input manual trigger status 8.16 Virtual input1.setvi.cgi?vi0=0150001 2.setvi.cgi?vi0=1 8.17 Open Timeshift Stream timeshift_enable=1URL commands for FD8367 timeshift_c<n>_s<m>_allow=1request 8.18 Open Anystreammjpeg_quant h264 intraperiod 8.19 Export Files URL commands for FD8367316 - Users Manual Method: POST 8.20 Upload Filesstime URL commands for FD83678.21 Media on demand stimeCompatible Accessories Technical SpecificationsTechnical Specifications DimensionsVIVOTEK Technical SpecificationsDimensions Compatible AccessoriesAMR-NBStandard Technology License NoticeMPEG-4AAC Technology MPEG-4Visual TechnologyVCCI Warning Electromagnetic Compatibility EMCFCC Statement CE Mark Warning