VIVOTEK

You can click Restore to recall the original settings without incorporating the changes. When completed with the settings on this page, click Save to enable the settings.

If you want to configure another sensor setting for day/night/schedule mode, please click Profile to open the Profile of exposure settings page as shown below.

Activated period: Select the mode this profile to apply to: Day mode, Night mode, or Schedule mode. Please manually enter a range of time if you choose Schedule mode. Then check Save to take effect.

Please follow the steps below to set up a profile:

1.Select Enable this profile.

2.Select the applicable mode: Day mode, Night mode, or Schedule mode. Please manually enter a range of time if you choose Schedule mode.

3.Configure Exposure control settings in the folowing columns. Please refer to previous dicussions for detailed information.

4.Click Save to enable the setting and click Close to exit the page.

52 - User's Manual

Page 52
Image 52
Vivotek FD8169 user manual Select Enable this profile