Vivotek FD8365EHV user manual Edge

VIVOTEK

function	zoom,	Function type
	focus,	zoom – Move zoom motor
	auto,	focus – Move focus motor
	scan,	auto – Perform auto focus
	stop,	scan – Perform focus scan
	positioning	stop – Stop current operation
	getstatus	positioning – Position the motors
		getstatus – Information of motors, return value as below:
		remote_focus_focus_motor_max: Maximum steps of focus
		motor
		remote_focus_zoom_motor_max: Maximum steps of zoom
		motor
		remote_focus_focus_motor_start: Start point of effective
		focal length
		remote_focus_focus_motor_end: End point of effective focal
		length
		remote_focus_focus_motor: Current position of focus motor
		remote_focus_zoom_motor: Current position of zoom motor
		remote_focus_focus_enable: Current function of focus motor
		remote_focus_zoom_enable: Current function of zoom motor
		remote_focus_value_mode: Source of focus value. 0: ISP, 1:
		Edge.
direction	direct,	Motor’s moving direction.
	forward,	It works only if function=zoom focus.
	backward
position	0 ~ <motor_max>	Motor’s position.
		It works only if function=zoom focus and direction=direct.
		<motor_max> is refer to remote_focus_focus_motor_max or
		remote_focus_zoom_motor_max which replied from
		"function=getstatus"
steps	1 ~ <motor_max>	Motor’s moving steps.
		It works only if function=zoom focus and direction=forward
		backward.
		<motor_max> is refer to remote_focus_focus_motor_max or
		remote_focus_zoom_motor_max which replied from
		"function=getstatus"
iris	N/A	Open iris or not.
		It works only if function=auto scan.

User's Manual - 211