VIVOTEK
Hardware Installation
Opening Dome Cover
First, use the included T20 hex key stardriver to loosen the four screws and detach the dome cover from the camera base. Follow the steps below to install the camera either to a ceiling or a wall.
Tamper-proof Screw
i | Connect the supplied power & |
IO cables if your switch does | |
| not support PoE. |
|
|
Rubber Stopper on the
Hole for Power & IO
Cables
Rubber Seal Plug for RJ45 Ethernet Cable
Dome Cover Retainer
Dome Cover Retainer
User's Manual - 9
