Vivotek FE8173 user manual IR cut control, Image setting per channel

				VIVOTEK
maxgain	0~100	100	4/4	Manual set maximum gain value.
mingain	0~100	0	4/4	Manual set minimum gain value.

7.10 IR cut control

Group: ircutcontrol (capability.nvideoinprofile > 0)

NAME		VALUE		DEFAULT		SECURITY		DESCRIPTION
						(get/set)
mode		auto,		auto	6/6			Set IR cut control mode
		day,
		night,
		di,
		schedule
		<product
		dependent>
daymodebegintime	00:00~23:59		07:00		6/6			Day mode begin time
daymodeendtime	00:00~23:59		18:00		6/6			Day mod end time
bwmode	<boolean>		1		6/6		Switch to B/W in night mode if
								enabled
sensitivity		low,		normal	6/6			Sensitivity of light sensor
		normal,
		high
enableextled		<boolean>	0		1/6			External IR led enable

7.11 Image setting per channel

Group: image_c<0~(n-1)>for n channel products

NAME		VALUE		DEFAULT		SECURITY		DESCRIPTION
						(get/set)
brightness	-5~5		-5		4/4			Adjust brightness of image
								according to mode settings.
saturation	-5~5,100		0		4/4			Adjust saturation of image
							according to mode settings.
							100 for saturation percentage
							mode.
saturationpercent	0~100		50		4/4			Adjust saturation value of
								percentage when saturation=100
contrast	-5 ~ 5		0		4/4			Adjust contrast of image
								according to mode settings.

User's Manual - 153