Vivotek FE8173 user manual Return to Home Position

VIVOTEK

Video Stream: This Network Cmera supports multiple streams (stream #1 ~ #3) simultaneously. You can select any one of them for live viewing. For more information about multiple streams, please refer to page 58 for detailed information.

Manual Trigger: Click to manually enable or disable an event trigger. Please configure an event setting before enabling this function. A total of 3 or 4 event settings can be configured. For more information about event setting, please refer to page 98. If you want to hide this item on the homepage, please go to the System > Homepage Layout > General settings > Customized button to deselect the “show manual trigger button” checkbox.

Digital Output: Click to turn the digital output device on or off.

PTZ Control Panel:			Up
			Return to Home Position
	Left		Right
	Down		Zoom In
Zoom Out
Start to Auto Pano				Start to Auto Rotate
		Stop Auto Pano/Rotate

Pano.: Click this button to start the automated circular rotation through a regional view (360° continuous rotation). Note that this function does not apply in a Panoramic view because a Panoramic view already shows the full coverage.

Stop: Click this button to stop the Auto Pano and Auto Rotate functions.

Rotate: Once the Administrator has determined a list of preset PTZ positions, click this button to command the camera to consecutively display views of these positions. The Network Camera will display these views continuously. For more information, please refer to PTZ settings on page 95.

Pan speed	Tilt speed	Zoom speed	Panoramic	Rotate speed
			speed
-5	-5	-5	-	-	Slower
-4	-4	-4	-	-
-3	-3	-3	-	-
-2	-2	-2	-	-
-1	-1	-1	-	-
0	0	0	0	0
1	1	1	1	1
2	2	2	2	2
3	3	3	3	3
4	4	4	4	4	Faster
5	5	5	5	5

Pan /Tilt /Zoom /Panoramic/Rotate speed: Adjust the speed of these controls when exerted:

User's Manual - 29