VIVOTEK
Hardware Installation
Opening Dome Cover
First, open the dome cover by pressing the release button. You may squeeze the opposite edge of the dome cover if the dome cover does not come off easily. Then, follow the steps below to in- stall the camera to either a ceiling or a wall.
Slide cover
Release
button
If you plan to route cables from the side of camera, remove the rubber slide cover from the dome cover.
J7 |
Connecting Ethernet Cable
& the Power and IO Cable
J6
Connect the supplied power & IO cables if your
switch does not support PoE. Connect the white header connectors to J6 and J7 on the camera.
Power and IO
cables
User's Manual - 9
