Vivotek IP2112, IP2122 Ethernet Environment, Hardware installation, Power on, Cable connection

Ethernet Environment

Hardware installation

Before installing multiple Network Cameras at the well-chosen locations, the administrator should memorize the serial numbers on the packages respectively for future use.

Cable connection

Connect the supplied cables from Network Camera to related devices according to the above diagram. Note that the power adaptor must be kept unplugged until other cables are firmly connected.

Power on

Make sure all cables are correctly and firmly connected before turning on Network Camera. Turn on cameras, sensors, alarm devices, and then attach the power adaptor of Network Camera to the electric power socket. After the POST (power-on self test) is complete and the result is successful, Network Camera is ready for software configuration as described in this manual. At this stage, network speed and video modulation type are automatically detected. Refer to the configuration section for further information.

Connect the power jack of the power adapter to Network Camera prior to plugging

the utility end into the utility power socket. It will reduce accidental electric surge shock.

11